7. Protocols EFI Driver Model Test

7.1. EFI_DRIVER_BINDING_PROTOCOL Test

Reference Document:

UEFI Specification, EFI_DRIVER_BINDING_PROTOCOL Section.

This test will change the system data during testing. It is not included in the EFI SCT.

7.2. EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL Test

Reference Document:

UEFI Specification, EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL Section.

7.2.1. GetDriver()

Number	GUID	Assertion	Test Description
5.5.2.1.1	0x013a1d94, 0x42ec, 0x429c, 0xb4, 0x99, 0x9d, 0x67, 0x5c, 0xea, 0x32, 0xe2	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.GetDriver - Invokes GetDriver() with invalid ControllerHandle.	Call GetDriver() with invalid ControllerHandle. It should return EFI_INVALID_PARAMETER.
5.5.2.1.2	0xec346531, 0x5125, 0x4e5f, 0x93, 0xa9, 0x7a, 0x7a, 0xed, 0xc0, 0xe3, 0xb9	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.GetDriver - Invokes GetDriver() with invalid DriverImageHandle	Call GetDriver() with invalid DriverImagePath. It should return EFI_INVALID_PARAMETER.
5.5.2.1.3	0xb6ce6934, 0xae1d, 0x41be, 0xba, 0x01, 0xac, 0x73, 0x49, 0x70, 0xe0, 0xb5	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.GetDriver - Invokes GetDriver() and verify interface correctness within test case	Call GetDriver() with DriverImageHandle is NULL. If the return status is EFI_SUCCESS, get the next image handle till the end. The return status should be EFI_SUCCESS, except the last one. The last one should be EFI_NOT_FOUND.
5.5.2.1.4	0xf8e30f06, 0x98b8, 0x4aba, 0xa0, 0x73, 0x67, 0x69, 0x33, 0xc0, 0xf8, 0x81	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.GetDriver - Invokes GetDriver() and verify whether the image handle is installed.	Call GetDriverPath() to get the valid DevicePath.Call LoadImage() to get the DriverImageHandle. Use this DevicePath and DriverImageHandle to call DriverLoaded().Call GetDriver().The Image Handle got by the GetDriver() should be same as the former handle which is got by LoadImage().The new DriverImageHandle should be same as the before one.

7.2.2. GetDriverPath()

Number	GUID	Assertion	Test Description
5.5.2.2.1	0x47008c31, 0xe877, 0x4acf, 0x88, 0x7a, 0xd5, 0x56, 0xd4, 0xb1, 0xd5, 0xe3	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.GetDriverPath - Invokes GetDriverPath() with invalid ControllerHandle.	Call GetDriverPath() with invalid ControllerHandle. Return status should be EFI_INVALID_PARAMETER.
5.5.2.2.2	0xbb8d1b45, 0xe187, 0x4195, 0xa9, 0xdc, 0xdb, 0xc7, 0x5e, 0xef, 0x99, 0x92	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.GetDriverPath - Invokes GetDriverPath() with invalid DriverImageHandle	Call GetDriverPath() with invalid DriverImagePath. Return status should be EFI_INVALID_PARAMETER.
5.5.2.2.3	0xe0434e5d, 0xa452, 0x4ef6, 0xb3, 0x90, 0xba, 0x12, 0x2a, 0xbb, 0xa8, 0xa8	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.GetDriverPath - Invokes GetDriverPath() and verify interface correctness within test case	Call GetDriverPath() with DriverImagePath is NULL.If the return status is EFI_SUCCESS, get the next image handle till the end. The return status should be EFI_SUCCESS, except the last one. The last one should be EFI_NOT_FOUND.

7.2.3. DriverLoaded()

Number	GUID	Assertion	Test Description
5.5.2.3.1	0x7bad1b57, 0xc99c, 0x48c0, 0xb5, 0x28, 0x0b, 0x86, 0x0e, 0xfc, 0x27, 0xc3	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.DriverLoaded - Invokes DriverLoaded() and verify interface correctness within test case	Call GetDriverPath() to get the valid DevicePath.Call LoadImage() to get the Driver Image Handle.Use this DevicePath and Driver Image Handle to call DriverLoaded().The return status should be EFI_SUCCESS.
5.5.2.3.2	0x4d764ca3, 0x4d43, 0x4a89, 0x93, 0x4b, 0x8f, 0x60, 0x9e, 0xca, 0x82, 0x4d	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.DriverLoaded - Invokes DriverLoaded() with DriverImagePath not gotten from the prior call to GetDriverPath().	Call DriverLoaded() with DriverImagePath is not a device path that was returned on a prior call to GetDriverPath() for the controller specified by ControllerHandle. Return status should be EFI_NOT_FOUND.
5.5.2.3.3	0x745042f7, 0xa9e8, 0x436b, 0x8c, 0x44, 0x42, 0x49, 0x07, 0x90, 0x68, 0x50	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.DriverLoaded - Invokes DriverLoaded() with invalid ControllerHandle	Call DriverLoaded() with invalid ControllerHandle .The return status should be EFI_INVALID_PARAMETER.
5.5.2.3.4	0xecc09588, 0xb786, 0x49b1, 0x93, 0x7f, 0x8e, 0xed, 0x89, 0xa7, 0x52, 0xd6	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.DriverLoaded - Invokes DriverLoaded() with invalid DriverImagePath.	Call DriverLoaded() with invalid DriverImagePath .The return status should be EFI_INVALID_PARAMETER.
5.5.2.3.5	0xf5d05588, 0x0d6a, 0x40fa, 0xa9, 0x54, 0x4b, 0x40, 0xd7, 0x9b, 0x4e, 0x5b	EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL.DriverLoaded - Invokes DriverLoaded() with invalid DriverImageHandle	Call DriverLoaded() with invalid DriverImageHandle. The return status should be EFI_INVALID_PARAMETER.

7.3. EFI_BUS_SPECIFIC_DRIVER_OVERRIDE_PROTOCOL Test

Reference Document:

UEFI Specification, EFI_BUS_SPECIFIC_DRIVER_OVERRIDE_PROTOCOL Section.

7.3.1. GetDriver()

Number	GUID	Assertion	Test Description
5.5.3.1.1	0x18a52d36, 0xd149, 0x414c, 0xa8, 0xc9, 0x43, 0xc8, 0x55, 0x71, 0xc6, 0x5f	EFI_BUS_SPECIFIC_DRIVER_OVERRIDE_PROTOCOL.GetDriver – GetDriver returns EFI_SUCCESS with valid DriverImageHandle	1. Circularly call GetDriver() with DriverImageHandle retrieved by the last call of GetDriver(), until the end of the list of override drivers is reached. Expected Behavior: The return status of each valid DriverImageHandle must be EFI_SUCCESS.
5.5.3.1.2	0x841a7b86, 0xabf0, 0x40af, 0x92, 0x67, 0x3f, 0xb3, 0x69, 0x2f, 0xc0, 0x37	EFI_BUS_SPECIFIC_DRIVER_OVERRIDE_PROTOCOL.GetDriver – GetDriver returns EFI_NOT_FOUND with unsupported Parameters	1. Circularly call GetDriver() with DriverImageHandle retrieved by the last call of GetDriver(), until the end of the list of override drivers is reached. Expected Behavior: The last return status must be EFI_NOT_FOUND.
5.5.3.1.3	0x2f0b7eb4, 0xb6b4, 0x4a58, 0x87, 0x55, 0x93, 0x52, 0xd4, 0x7e, 0x27, 0xef	EFI_BUS_SPECIFIC_DRIVER_OVERRIDE_PROTOCOL.GetDriver – GetDriver () returns EFI_INVALID_PARAMETER with invalid DriverImageHandle	1. Pass the invalid DriverImageHandle to the function Expected Behavior: The return status must be EFI_INVALID_PARAMETER.

7.4. EFI_DRIVER_CONFIGURATION_PROTOCOL Test

Reference Document:

UEFI Specification, EFI_BUS_SPECIFIC_DRIVER_OVERRIDE_PROTOCOL Section.

7.4.1. SetOptions()

Number	GUID	Assertion	Test Description
5.5.4.1.1	0x82d78ef0, 0x0e7c, 0x4338, 0xb0, 0xe6, 0xef, 0x07, 0x01, 0x35, 0x18, 0xc7	EFI_DRIVER_CONFIGURATION_PROTOCOL.SetOptions – SetOptions() returns EFI_INVALID_PARAMETER with invalid ControllerHandle	1. Call SetOptions() with invalid ControllerHandle. Return status of SetOptions() is EFI_INVALID_PARAMETER.
5.5.4.1.2	0x159d6867, 0x6e6f, 0x4cb0, 0x99, 0xc1, 0xdf, 0x57, 0x86, 0xc0, 0x61, 0x3f	EFI_DRIVER_CONFIGURATION_PROTOCOL.SetOptions – SetOptions() returns EFI_INVALID_PARAMETER with invalid ActionRequired	1. Call SetOptions() with an ActionRequired value of NULL. Return status must be EFI_INVALID_PARAMETER.
5.5.4.1.3	0x97465a70, 0x7746, 0x4116, 0x93, 0xbc, 0x22, 0xb1, 0xaa, 0x9e, 0x14, 0xa2	EFI_DRIVER_CONFIGURATION_PROTOCOL.SetOptions – SetOptions() returns EFI_INVALID_PARAMETER with invalid ControllerHandle & ChildHandle.	1. Call SetOptions() with: ( ControllerHandle == NULL && ChildHandle != NULL ). Return status must be EFI_INVALID_PARAMETER.
5.5.4.1.4	0x976f0e0a, 0xa696, 0x4922, 0x8a, 0x44, 0xf3, 0x50, 0xf5, 0x0b, 0xd5, 0xe8	EFI_DRIVER_CONFIGURATION_PROTOCOL.SetOptions – SetOptions() returns EFI_UNSUPPORTED with unsupported Language.	1. Parse the EFI_DRIVER_CONFIGURATION_PROTOCOL.SupportedLanguage, compare with the language code repository. If could not find out an unsupported language, then skip this checkpoint. 2. Call SetOptions() with all unsupported Language codes. Each return status must be EFI_UNSUPPORTED.
5.5.4.1.5	0x12b263e5, 0xcb83, 0x4855, 0x94, 0x35, 0x6e, 0xfb, 0x53, 0x9d, 0x22, 0x51	EFI_DRIVER_CONFIGURATION_PROTOCOL.SetOptions – SetOptions() returns EFI_UNSUPPORTED with unsupported ControllerHandle.	1. Test case creates a virtual device handle that does not stand for any device controller. 2. Input this handle as the ControllerHandle input for the SetOptions(). The return code must be EFI_UNSUPPORTED.

7.4.2. OptionsValid()

Number	GUID	Assertion	Test Description
5.5.4.2.1	0x9a4ba394, 0xbf63, 0x4dba, 0xaf, 0x83, 0xc7, 0x50, 0xc9, 0xff, 0xaa, 0xf4	EFI_DRIVER_CONFIGURATION_PROTOCOL.OptionsValid – OptionsValid() returns EFI_INVALID_PARAMETER with invalid ControllerHandle.	1. Call OptionsValid() with invalid ControllerHandle. Return status must be EFI_INVALID_PARAMETER.
5.5.4.2.2	0x10a4cd4b, 0x0e42, 0x4bed, 0x9b, 0x3e, 0x53, 0x21, 0x50, 0x9c, 0xd0, 0xf6	EFI_DRIVER_CONFIGURATION_PROTOCOL.OptionsValid – OptionsValid() returns EFI_UNSUPPORTED with unsupported ControllerHandle.	1. Test case creates a virtual device handle that does not stand for any device controller. 2. Input this handle as the ControllerHandle input for the OptionsValid(). It should return EFI_UNSUPPORTED.

7.4.3. ForceDefaults()

Number	GUID	Assertion	Test Description
5.5.4.3.1	0x45b89573, 0xff7d, 0x4549, 0xbc, 0x5f, 0x7f, 0x23, 0x04, 0xa1, 0x1c, 0x43	EFI_DRIVER_CONFIGURATION_PROTOCOL.ForceDefaults – ForceDefaults() returns EFI_INVALID_PARAMETER with invalid ControllerHandle.	1. Call ForceDefaults() with invalid ControllerHandle. Return status must be EFI_INVALID_PARAMETER.
5.5.4.3.2	0x0ede4bce, 0x0456, 0x45e5, 0x86, 0x04, 0x88, 0xc4, 0xa2, 0xbb, 0x7c, 0xa1	EFI_DRIVER_CONFIGURATION_PROTOCOL.ForceDefaults – ForceDefaults() returns EFI_INVALID_PARAMETER. with an ActionRequired value of NULL	1. Call ForceDefaults() with an ActionRequired value of NULL. Return status must be EFI_INVALID_PARAMETER.
5.5.4.3.3	0x0e7dd3db, 0x072b, 0x45b6, 0xaa, 0xdf, 0xf3, 0xed, 0xed, 0x37, 0xe6, 0xae	EFI_DRIVER_CONFIGURATION_PROTOCOL.ForceDefaults – ForceDefaults() returns EFI_UNSUPPORTED with unsupported ControllerHandle.	1. Test case creates a virtual device handle that does not stand for any device controller. 2. Input this handle as the ControllerHandle input for the ForceDefaults(). It should return EFI_UNSUPPORTED.

7.5. EFI_DRIVER_DIAGNOSTICS_PROTOCOL Test

Reference Document:

UEFI Specification, EFI_DRIVER_DIAGNOSTICS_PROTOCOL Section.

7.5.1. RunDiagnostic()

Number	GUID	Assertion	Test Description
5.5.5.1.1	0xe6351da7, 0x8e29, 0x451b, 0xb1, 0x16, 0xda, 0x93, 0x29, 0x97, 0x0f, 0x17	EFI_DRIVER_DIAGNOSTIC_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with invalid ControllerHandle.	1. Call RunDiagnostics() with invalid ControllerHandle. Return Status must be EFI_INVALID_PARAMETER
5.5.5.1.2	0xf98940fb, 0x1ae6, 0x42a8, 0x95, 0xb3, 0xd3, 0x90, 0x84, 0x17, 0x2e, 0xb7	EFI_DRIVER_DIAGNOSTIC_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with a Language value of NULL.	1. Call RunDiagnostics() with a Language value of NULL. Return Status must be EFI_INVALID_PARAMETER
5.5.5.1.3	0xe348a9ee, 0x10fc, 0x4487, 0x8c, 0x1a, 0xfc, 0xa8, 0x11, 0xd7, 0xbb, 0x24	EFI_DRIVER_DIAGNOSTIC_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with an ErrorType value of NULL.	1. Call RunDiagnostics() with an ErrorType value of NULL. Return Status must be EFI_INVALID_PARAMETER
5.5.5.1.4	0x1f03e17d, 0x3f3c, 0x45ab, 0x93, 0xf5, 0xd3, 0xde, 0x3e, 0xc3, 0xe3, 0xcc	EFI_DRIVER_DIAGNOSTIC_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with a BufferSize value of NULL.	1. Call RunDiagnostics() with a BufferSize value of NULL. Return status must be EFI_INVALID_PARAMETER
5.5.5.1.5	0x7a73befe, 0xb271, 0x486f, 0x9b, 0x0e, 0x97, 0x3c, 0x5e, 0x80, 0x64, 0xd9	EFI_DRIVER_DIAGNOSTIC_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with a Buffer value of NULL.	1. Call RunDiagnostics() with a Buffer value of NULL. Return status must be EFI_INVALID_PARAMETER
5.5.5.1.6	0xaeab03a7, 0xfa56, 0x4e97, 0x8e, 0x1c, 0xc3, 0x35, 0xb4, 0xa4, 0xb4, 0x1c	EFI_DRIVER_DIAGNOSTIC_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_UNSUPPORTED with unsupported Language.	1. Parse the EFI_DRIVER_DIAGNOSTICS_PROTOCOL.SupportedLanguage, compare with the language code repository. If could not find out an unsupported language, then skip this checkpoint. 2. Call RunDiagnostics() with all unsupported Language codes. Each return status of RunDiagnostics() is EFI_UNSUPPORTED.
5.5.5.1.7	0xf8d9425c, 0x4bc8, 0x44a9, 0xa4, 0x33, 0x9a, 0x2c, 0x01, 0xec, 0x58, 0x27	EFI_DRIVER_DIAGNOSTIC_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_UNSUPPORTED with unsupported ControllerHandle.	1. Test case creates a virtual device handle that does not stand for any device controller. 2. Input this handle as the ControllerHandle input for the RunDiagnostics(). It should return EFI_UNSUPPORTED.

7.6. EFI_DRIVER_DIAGNOSTICS2_PROTOCOL Test

Reference Document:

UEFI Specification, EFI_DRIVER_DIAGNOSTICS2_PROTOCOL Section.

7.6.1. RunDiagnostic()

Number	GUID	Assertion	Test Description
5.5.6.1.1	0x6c872dce, 0x787e, 0x44dc, 0xa8, 0x87, 0xea, 0x1b, 0x8d, 0x55, 0xfd, 0x59	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with NULL ControllerHandle.	1. Call RunDiagnostics() with NULL ControllerHandle. Return Status must be EFI_INVALID_PARAMETER
5.5.6.1.2	0xf3263eb0, 0x1630, 0x4749, 0x98, 0xe6, 0xc9, 0x50, 0x23, 0x15, 0xd3, 0xa2	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with invalid ChildHandle.	1. Call RunDiagnostics() with invalid ChildHandle. Return Status must be EFI_INVALID_PARAMETER
5.5.6.1.3	0xc5b8e4ef, 0x2fa4, 0x4ae9, 0xa6, 0x5e, 0xdd, 0x47, 0x2d, 0xfd, 0x81, 0xe5	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with Language value of NULL.	1. Call RunDiagnostics() with Language value of NULL. Return Status must be EFI_INVALID_PARAMETER
5.5.6.1.4	0xe23426c8, 0x5fe2, 0x4e80, 0xa9, 0x40, 0xab, 0x66, 0x10, 0x63, 0x28, 0xf6	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with ErrorType value of NULL.	1. Call RunDiagnostics() with ErrorType value of NULL. Return status must be EFI_INVALID_PARAMETER
5.5.6.1.5	0x6e86ac1a, 0x0ce8, 0x4f83, 0x9d, 0xa2, 0x38, 0x79, 0x1e, 0xff, 0x0f, 0x8c	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with a BufferSize value of NULL.	1. Call RunDiagnostics() with a BufferSize value of NULL. Return status must be EFI_INVALID_PARAMETER
5.5.6.1.6	0x4c955e4c, 0x86b9, 0x4c6d, 0x83, 0xa0, 0x4e, 0xa3, 0x34, 0x67, 0xd0, 0x38	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_INVALID_PARAMETER with a Buffer value of NULL.	1. Call RunDiagnostics() with a Buffer value of NULL. Return status must be EFI_INVALID_PARAMETER
5.5.6.1.7	0x8b218e7b, 0x24a0, 0x400c, 0xa8, 0x69, 0x1a, 0xd1, 0x14, 0x8e, 0x7a, 0x07	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_UNSUPPORTED with unsupported Language.	1. Parse the EFI_DRIVER_DIAGNOSTICS_PROTOCOL.SupportedLanguage, compare with the language code repository. If could not find out an unsupported language, then skip this checkpoint. 2. Call RunDiagnostics() with all unsupported Language codes. Each return status of RunDiagnostics() is EFI_UNSUPPORTED.
5.5.6.1.8	0xef071998, 0xeb8d, 0x488f, 0xa5, 0xd5, 0x9e, 0x44, 0x7a, 0x54, 0x20, 0x8b	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_UNSUPPORTED with virtual device handle	1. Test case creates a virtual device handle that does not stand for any device controller. 2. Input this handle as the ControllerHandle input for the RunDiagnostics(). It should return EFI_UNSUPPORTED.
5.5.6.1.9	0xc9da5237, 0x6ad0, 0x4c74, 0x88, 0xd0, 0x6e, 0x51, 0x7f, 0x6c, 0x4f, 0x63	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() return EFI_UNSUPPORTED with virtual child handle	1. Test case creates a virtual device handle that does not stand for any device controller. 2. Input this handle as the ChildHandle input for the RunDiagnostics(). It should return EFI_UNSUPPORTED.
5.5.6.1.10	0x2e31c21e, 0x1999, 0x42b7, 0x96, 0xe6, 0xda, 0x8e, 0xfc, 0xc1, 0xf1, 0x51	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_SUCCESS with supported Language.	1. Call RunDiagnostics() with supported Language. Return status must be EFI_SUCCESS.
5.5.6.1.11	0x04405fac, 0x1688, 0x4213, 0xa1, 0x1d, 0x4b, 0x64, 0x58, 0xff, 0xe7, 0x2c	EFI_DRIVER_DIAGNOSTIC2_PROTOCOL.RunDiagnostics – RunDiagnostics() returns EFI_SUCCESS with supported Language.	1. Call RunDiagnostics() with supported Language.. Return status must be EFI_SUCCESS.

7.7. EFI_COMPONENT_NAME_PROTOCOL Test

Reference Document:

UEFI Specification, EFI_COMPONENT_NAME_PROTOCOL Section.

7.7.1. GetDriverName()

Number	GUID	Assertion	Test Description
5.5.7.1.1	0x628fcfba, 0xc74b, 0x4038, 0x91, 0x5a, 0x01, 0x1a, 0xb9, 0x0f, 0x67, 0x35	EFI_COMPONENT_NAME_PROTOCOL.GetDriverName – GetDriverName() returns its driver name in every supported language.	For each supported language: 1. Call GetDriverName() to retrieve current driver’s name. 2. Dump the returned driver name. Each return code of GetDriverName() should be EFI_SUCCESS.
5.5.7.1.2	0x59ed70e0, 0x9cc8, 0x48d5, 0x86, 0x75, 0xed, 0xcb, 0xb0, 0x88, 0xeb, 0xd9	EFI_COMPONENT_NAME_PROTOCOL.GetDriverName – GetDriverName() returns EFI_INVALID_PARAMETER with a Language value of NULL.	1. Call GetDriverName() with a Language value of NULL. THe return status of GetDriverName() is EFI_INVALID_PARAMETER.
5.5.7.1.3	0x9cffff0f, 0x65a7, 0x43a5, 0x9e, 0xf1, 0x74, 0x02, 0x27, 0x82, 0x3d, 0xfc	EFI_COMPONENT_NAME_PROTOCOL.GetDriverName – GetDriverName() returns EFI_INVALID_PARAMETER with a DriverName value of NULL.	1. Call GetDriverName() with a DriverName value of NULL. The return status of GetDriverName() is EFI_INVALID_PARAMETER.
5.5.7.1.4	0xcb089876, 0xe819, 0x4fd8, 0xac, 0xbe, 0x47, 0x56, 0x8c, 0x10, 0x93, 0xcc	EFI_COMPONENT_NAME_PROTOCOL.GetDriverName – GetDriverName() returns EFI_UNSUPPORTED with unsupported Language.	1. Parse the EFI_COMPONENT_NAME_PROTOCOL.SupportedLanguage, compare with the language code repository. If could not find out an unsupported language, then skip this checkpoint. 2. Call GetDriverName() with all unsupported Language codes. Each return status of GetDriverName() is EFI_UNSUPPORTED.

7.7.2. GetControllerName()

Number	GUID	Assertion	Test Description
5.5.7.2.1	0x961fabd3, 0x97ec, 0x4c97, 0xa0, 0x5a, 0xc2, 0xfd, 0xa6, 0x32, 0xf1, 0x3d	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() must successfully retrieve ControllerName for all manageable ControllerHandle.	1. Retrieve all controller handles that are managed by the driver specified by the component protocol instance. 2. For each ControllerHandle Call GetControllerName() with the ControllerHandle and at the same time, with a ChildHandle value of NULL in every supported language. The GetControllerName() should return EFI_SUCCESS.
5.5.7.2.2	0xa83cfe57, 0x8391, 0x472b, 0xbc, 0x0e, 0x12, 0x18, 0x95, 0x06, 0x86, 0x70	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() must successfully retrieve ControllerName for ChildHandle of manageable ControllerHandle.	1. Retrieve all controllers that are managed by the driver specified by the component instance. 2. Retrieve all child controllers. (If the controller has no child controller, then skip this checkpoint). 3. For each controller and its child controller: Call GetControllerName() with every child controller of the bus controller. The GetControllerName() should return EFI_SUCCESS.
5.5.7.2.3	0x735f5c9b, 0x95c9, 0x4949, 0xa8, 0xf7, 0x0a, 0x61, 0x06, 0x2e, 0x28, 0x67	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() returns EFI_INVALID_PARAMETER with invalid ControllerHandle.	1. Call GetControllerName() with invalid ControllerHandle. The return status of GetControllerName() is EFI_INVALID_PARAMETER.
5.5.7.2.4	0x6f51eca4, 0x1808, 0x4b5b, 0x96, 0x9b, 0x88, 0xd8, 0xc8, 0xa5, 0x00, 0x3e	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() returns EFI_INVALID_PARAMETER with invalid ChildHandle when the driver is not a device driver.	Call GetControllerName() with invalid ChildHandle when the driver is not a device driver. The return status of GetControllerName() is EFI_INVALID_PARAMETER.
5.5.7.2.5	0x9d3dedbf, 0xa123, 0x475b, 0xb6, 0x3e, 0x15, 0x01, 0xbc, 0x99, 0x81, 0x83	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() returns EFI_INVALID_PARAMETER with a ControllerName value of NULL.	1. Call GetControllerName() with a ControllerName value of NULL. The return status of GetControllerName() is EFI_INVALID_PARAMETER.
5.5.7.2.6	0xb436d551, 0xf2f4, 0x4fdc, 0xb0, 0x31, 0x07, 0x3d, 0xad, 0xec, 0xd7, 0x16	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() returns EFI_INVALID_PARAMETER with a Language value of NULL	1. Call GetControllerName() with a Language value of NULL The return status of GetControllerName() is EFI_INVALID_PARAMETER.
5.5.7.2.7	0x27a4781a, 0xe85a, 0x4714, 0xab, 0x9a, 0x67, 0xc1, 0x01, 0x38, 0x5e, 0x83	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() returns EFI_UNSUPPORTED with unsupported Language.	1. Parse the EFI_COMPONENT_NAME_PROTOCOL.SupportedLanguage, compare with the language code repository. If could not find out an unsupported language, then skip this checkpoint. 2. Find out all controller handles that will cause GetControllerHandle() return EFI_SUCCESS when with supported Language. 3. Call GetDriverName() with each ControllerHandle and at the same time with those unsupported Language codes. When input with unsupported Language, the return status of GetControllerName() should be EFI_UNSUPPORTED.
5.5.7.2.8	0xa1a56539, 0x8150, 0x483f, 0xa1, 0xb7, 0x23, 0xaf, 0x4f, 0x84, 0x64, 0xc7	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() returns EFI_UNSUPPORTED with irrelevant ControllerHandle	1. Test case creates a virtual device handle that does not stand for any device controller. 2. Input this handle as the ControllerHandle input for the GetControllerName(). It should return EFI_UNSUPPORTED.
5.5.7.2.9	0x8a5321c3, 0x3e88, 0x4c62, 0xbf, 0xdd, 0xc7, 0xe4, 0xec, 0xf5, 0x1f, 0x9f	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() returns EFI_UNSUPPORTED with irrelevant ChildHandle	1. Test case creates a virtual device handle that does not stand for any device controller. 2. Input this handle as the ChildHandle input for the GetControllerName() (at the same time, the ControllerHandle should be valid). It should also return EFI_UNSUPPORTED.
5.5.7.2.10	0xa5ecbbe1, 0x1795, 0x4798, 0xa8, 0x26, 0x20, 0x9c, 0x57, 0x8e, 0x1d, 0xe9	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() returns EFI_UNSUPPORTED with device handle and not-NULL ChildHandle	1. Test case gets a valid device handle, and an invalid ChildHandle. 2. Input this device handle as ControllerHandle and the ChildHandle. It should return EFI_UNSUPPORTED.
5.5.7.2.11	0xdb9e40a7, 0x8638, 0x4c0f, 0xb2, 0x94, 0xfe, 0x05, 0x23, 0xfa, 0x1e, 0x2f	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() go through each of the handles	Call GetGontrollerName()with all of the handles. The return status should not be EFI_INVALID_PARAMETER.
5.5.7.2.12	0x79ab9a12, 0xe535, 0x4727, 0xa0, 0x4d, 0x20, 0xb7, 0x8f, 0x91, 0x8f, 0x85	EFI_COMPONENT_NAME_PROTOCOL.GetControllerName – GetGontrollerName() go through each of the handles and child handles	Call GetGontrollerName()with all of the handles and child handles. The return status should not be EFI_INVALID_PARAMETER.

7.8. EFI_COMPONENT_NAME2_PROTOCOL Test

Reference Document:

UEFI Specification, EFI_COMPONENT_NAME2_PROTOCOL Section.

7.8.1. GetDriverName()

Number	GUID	Assertion	Test Description
5.5.8.1.1	0x31518904, 0x1307, 0x4bef, 0x84, 0xe6, 0x66, 0xff, 0x76, 0xa7, 0x8f, 0xf4	COMPONENT_NAME2_PROTOCOL.GetDriverName - GetDriverName() returns EFI_INVALID_PARAMETER with NULL Language	Call GetDriverName() with Language being NULL. The returned status should be EFI_INVALID_PARAMETER
5.5.8.1.2	0x7b478492, 0x53c0, 0x4748, 0xa2, 0x44, 0x60, 0xf3, 0xf2, 0xd0, 0xee, 0x5a	COMPONENT_NAME2_PROTOCOL.GetDriverName - GetDriverName() returns EFI_INVALID_PARAMETER with NULL DriverName	Call GetDriverName() with DriverName being NULL. The returned status should be EFI_INVALID_PARAMETER
5.5.8.1.3	0x36e0a7e5, 0xbfc8, 0x4ab9, 0xb4, 0x1a, 0x9d, 0x69, 0x25, 0x43, 0x6a, 0xd2	COMPONENT_NAME_PROTOCOL.GetDriverName - GetDriverName() returns EFI_UNSUPPORTED with unsupported language	Call GetDriverName() with unsupported Language. The returned status should be EFI_UNSUPPORTED
5.5.8.1.4	0x327aa49d, 0x4a8b, 0x4101, 0x8b, 0x0d, 0x92, 0x32, 0x33, 0xfc, 0x09, 0xe5	COMPONENT_NAME2_PROTOCOL.GetDriverName - GetDriverName() returns EFI_SUCCESS with supported languange	Call GetDriverName() with supported Language. The returned status should be EFI_SUCCESS

7.8.2. GetControllerName()

Number	GUID	Assertion	Test Description
5.5.8.2.1	0xc38a85af, 0x2d0a, 0x4bfa, 0x8f, 0x44, 0xa2, 0x47, 0xf1, 0xfd, 0x7b, 0x94	COMPONENT_NAME2_PROTOCOL.GetControllerName - GetControllerName() returns EFI_INVALID_PARAMETER with invalid ControllerHandle	Call GetControllerName() with invalid ControllerHandle. The returned status should be EFI_INVALID_PARAMETER
5.5.8.2.2	0xde8c8d23, 0x4aa6, 0x4dd7, 0x93, 0xbd, 0x35, 0x78, 0x40, 0x67, 0x6b, 0xff	COMPONENT_NAME2_PROTOCOL.GetControllerName - GetControllerName() returns EFI_INVALID_PARAMETER with invalid ChildHandle and non-device ControllerHandle	Call GetControllerName() with valid Bus Handle(non-device ControllerHandle) and invalid ChildHandle. The returned status should be EFI_INVALID_PARAMETER
5.5.8.2.3	0x8398d1d9, 0xdfb7, 0x47f1, 0xad, 0x65, 0x36, 0xf1, 0x2a, 0x6a, 0x47, 0xea	COMPONENT_NAME2_PROTOCOL.GetControllerName - GetControllerName() returns EFI_INVALID_PARAMETER with NULL ControllerName	Call GetControllerName() with valid device ControllerHandle and NULL ControllerName. The returned status should be EFI_INVALID_PARAMETER
5.5.8.2.4	0x8cf65e39, 0x125b, 0x4206, 0x99, 0x85, 0xca, 0xa5, 0x15, 0x68, 0x7b, 0x0a	COMPONENT_NAME2_PROTOCOL.GetControllerName - GetControllerName() returns EFI_INVALID_PARAMETER with NULL Language	Call GetControllerName() with valid device ControllerHandle and NULL Language. The returned status should be EFI_INVALID_PARAMETER
5.5.8.2.5	0x064d252b, 0xbc7f, 0x4859, 0x86, 0x02, 0xaf, 0xa9, 0x7f, 0x8e, 0xa2, 0xbd	COMPONENT_NAME2_PROTOCOL.GetControllerName - GetControllerName() returns EFI_UNSUPPORTED with unsupported language	Call GetControllerName() with unsupported Language. The returned status should be EFI_UNSUPPORTED
5.5.8.2.6	0x95c8bfd8, 0xc67c, 0x411e, 0x93, 0x95, 0x43, 0x28, 0x01, 0x2c, 0x07, 0x66	COMPONENT_NAME_PROTOCOL.GetControllerName - GetControllerName() returns EFI_UNSUPPORTED with irrelevant ControllerHandle	Call GetControllerName() with irrelevant ControllerHandle. The returned status should be EFI_UNSUPPORTED
5.5.8.2.7	0x155c06f0, 0xe315, 0x4175, 0xa0, 0xe9, 0x4d, 0xe3, 0xc5, 0x16, 0x3c, 0xb2	COMPONENT_NAME_PROTOCOL.GetControllerName - GetControllerName() returns EFI_UNSUPPORTED with irrelevant ChildHandle	Call GetControllerName() with irrelevant ChildHandle. The returned status should be EFI_UNSUPPORTED
5.5.8.2.8	0xabf5cd96, 0xfb74, 0x489c, 0xae, 0x70, 0xeb, 0x31, 0xa0, 0xfd, 0xef, 0x25	COMPONENT_NAME2_PROTOCOL.GetControllerName - GetControllerName() returns EFI_SUCCESS with supported language	Call GetControllerName() with Supported Language and valid ControllerHandle. The returned status should be EFI_SUCCESS
5.5.8.2.9	0x38bd708a, 0xf1d7, 0x4b3b, 0xb2, 0x39, 0x06, 0xf6, 0xfd, 0xa2, 0x1c, 0xb8	COMPONENT_NAME2_PROTOCOL.GetControllerName - GetControllerName() returns EFI_SUCCESS support language	Call GetControllerName() with Supported Language, valid ControllerHandle and valid ChildHandle. The returned status should be EFI_SUCCESS

7.9. EFI_PLATFORM_TO_DRIVER_CONFIGURATION_PROTOCOL

Reference Document:

UEFI Specification, EFI_PLATFORM_TO_DRIVER_CONFIGURATION_PROTOCOL Section.

7.9.1. Query()

Number	GUID	Assertion	Test Description
5.5.9.1.1	0x6acc3f19, 0xe9b, 0x4ff7, 0xbd,0xd0, 0x7e,0x49, 0x19,0x6, 0xa8, 0xdd	EFI_PLATFORM_TO_DRIVER_CONFIGURATION_PROTOCOL.Query - Invoke Query() and verify interface correctness	1. Call Query() with valid ControllerHandle and Instance 2. if EFI_SUCCESS, get the next ControllerHandle till the end 3. The return status should be EFI_SUCCESS except the last one. The last one should be EFI_NOT_FOUND.
5.5.9.1.2	0x4cfb435, 0x4569, 0x48bb, 0x8c,0x8a, 0xba,0x2a, 0xa7,0x5f, 0x16,0xe2	EFI_PLATFORM_TO_DRIVER_CONFIGURATION_PROTOCOL.Query - Invoke Query() with invalid ControllerHandle	Call Query() with invalid ControllerHandle, it should return EFI_INVALID_PARAMETER
5.5.9.1.3	0x28730223, 0x508, 0x46c9, 0x83, 0xf7, 0x94, 0xec, 0x52, 0x4, 0x65, 0x2a	EFI_PLATFORM_TO_DRIVER_CONFIGURATION_PROTOCOL.Query - Invoke Query() with invalid Instance	Call Query() with Instance is NULL, it should return EFI_INVALID_PARAMETER

7.9.2. Response()

Number	GUID	Assertion	Test Description
5.5.9.2.1	0x15cd60c3, 0xb30, 0x44df, 0xbe,0x9, 0x0,0xfa, 0x9f,0xe6, 0xf8,0xc5	EFI_PLATFORM_TO_DRIVER_CONFIGURATION_PROTOCOL.Response - Invoke Response() and verify interface correctness	1. Call Query() with valid ControllerHandle and Instance, call Response() with the same ControllerHandle and the arguments returned from Query() 2. if EFI_SUCCESS, get the next ControllerHandle till the end 3. The return status should be EFI_SUCCESS except the last one. The last one should be EFI_NOT_FOUND.
5.5.9.2.2	0x88e2dc36, 0x4d7b, 0x467a, 0xbb,0x60, 0xc9,0x97, 0xb7,0x22, 0xb7,0x12	EFI_PLATFORM_TO_DRIVER_CONFIGURATION_PROTOCOL.Response - Invoke Response() with invalid ControllerHandle	Call Query() and Response() with invalid ControllerHandle, the return status should be EFI_INVALID_PARAMETER

7.9.3. DMTF SM CLP ParameterTypeGuid

Number	GUID	Assertion	Test Description
5.5.9.3.1	0x35a69b6e, 0x1755, 0x41ca, 0x97,0xd7, 0xab,0xc3, 0xb7,0xb7, 0x7c,0xd3	EFI_CONFIGURE_CLP_PARAMETER_BLK.CLPCommand - verify the DMTF CLP command line NULL-terminated string and return EFI_SUCCESS.	1. Invoke Query(), produce EFI_CONFIGURE_CLP_PARAMETER_BLK. 2. Verify ParameterTypeGuid. 3. Compare the CLPCommand string with Standard command verbs and options. The return code should be EFI_SUCCESS
5.5.9.3.2	0x77b6a0b3, 0x7efe, 0x42f8, 0x98,0xcf, 0xf5,0x49, 0x51,0xe7, 0x1c,0x2c	EFI_CONFIGURE_CLP_PARAMETER_BLK.CLPReturnString – verify the CLP return string is “format=keyword” format	1. Invoke Query() and Response(), produce EFI_CONFIGURE_CLP_PARAMETER_BLK 2. Verify the CLPReturnString format is “format=keyword” format. The return code should be EFI_SUCCESS
5.5.9.3.3	0xd7cacc21, 0x4e96, 0x444c, 0x91,0xcb, 0x70,0x4e, 0x3f,0xa8, 0x31,0x33	EFI_CONFIGURE_CLP_PARAMETER_BLK.CLPCmdStatus - with valid command and return the command status of CLP with EFI_SUCCESS.	1. Invoke Query() and Response(), produce EFI_CONFIGURE_CLP_PARAMETER_BLK 2. Compare the CLPCmdStatus string with Standard command return status table. The return code should be EFI_SUCCESS
5.5.9.3.4	0x69e16544, 0x23bd, 0x4b46, 0x9d,0xe5, 0xe0,0x6a, 0xb4,0x3d, 0x8b,0x12	EFI_CONFIGURE_CLP_PARAMETER_BLK.CLPErrorValue - compare this parameter with CLP Error Value and return code EFI_SUCCESS.	1. Invoke Query() and Response(), produce EFI_CONFIGURE_CLP_PARAMETER_BLK 2. Compare the CLPErrorValue with Error Values. The return code should be EFI_SUCCESS
5.5.9.3.5	0x78e97814, 0x4c3d, 0x42b3, 0xae,0x7c, 0x7b,0x16, 0x61,0x69, 0x32,0x4a	EFI_CONFIGURE_CLP_PARAMETER_BLK. CLPMsgCode - compare with CLP Message Code, return code EFI_SUCCESS.	1. Invoke Query() and Response(), produce EFI_CONFIGURE_CLP_PARAMETER_BLK 2. verify the CLPMsgCode is equal to the CLP Probable Cause Value, the return code should be EFI_SUCCESS

7.10. EFI_DRIVER_SUPPORTED_EFI_VERSION_PROTOCOL Test

Reference Document:

UEFI Specification, EFI_DRIVER_SUPPORTED_EFI_VERSION_PROTOCOL Section.

Number	GUID	Assertion	Test Description
5.5.10.1.1	0x9b72180d, 0x155c, 0x4b7a, 0xbb, 0xa8, 0x99, 0x83, 0x7b, 0x2f, 0x9d, 0xf8	EFI_DRIVER_SUPPORTED_EFI_VERSION_PROTOCOL.Length - verify this value is the structure length, and return EFI_SUCCESS.	Verify the entire structure length is correct and return EFI_SUCCESS value.
5.5.10.1.2	0xac1951b1, 0x7243, 0x40a9, 0xa0, 0x1, 0x9d, 0x9d, 0x6e, 0x44, 0x8f, 0x5a	EFI_DRIVER_SUPPORTED_EFI_VERSION_PROTOCOL.FirmwareVersion - verify the parameter with EFI_2_10_SYSTEM_REVISION. Return EFI_SUCCESS or EFI_INCOMPATIBLE_VERSION..	Initialize the EFI_VERSION_PTOTOCOL and compare the version of the EFI Specification that driver conforms to with EFI_2_10_SYSTEM_REVISION. If equal, return EFI_SUCCESS; if not, return value should be EFI_INCOMPATIBLE_VERSION. .

7.11. EFI_ADAPTER_INFORMATION_PROTOCOL Test

Reference Document:

UEFI Specification, EFI_ADAPTER_INFORMATION_PROTOCOL Section.

7.11.1. GetInformation()

Number	GUID	Assertion	Test Description
5.5.11.1.1	0x0d68257b, 0xf647, 0x452a,0x97, 0x44,0xa2, 0x23,0xe6, 0xee,0x3d, 0xf2	EFI_ADAPTER_INFORMATION_PROTOCOL.GetInformation - GetInformation() returns EFI_SUCCESS with valid information type.	Call GetSupportedTypes() to get the valid Information type. Call GetInformation (), the return status should be EFI_SUCCESS and the InformationBlock != NULL.
5.5.11.1.2	0x15a3a10d, 0xca48, 0x4d52,0x99, 0x89,0x51, 0x71,0xfc, 0x90,0x90, 0x54	EFI_ADAPTER_INFORMATION_PROTOCOL.GetInformation - GetInformation()returns correct InformationBlockSize.	Call GetSupportedTypes() to get the valid Information type. Call GetInformation () the return status should be EFI_SUCCESS and the InformationBlock != NULL. Compare the InformationBlockSize Received from step2 with the expected size. Their size should be equal.
5.5.11.1.3	0xeb7c1cc7, 0x5c94, 0x40c6,0xbe, 0xaf,0x53, 0x08,0xd7, 0xf6,0x35, 0x01	EFI_ADAPTER_INFORMATION_PROTOCOL.GetInformation - GetInformation() returns EFI_UNSUPPORTEDwith unknown InformationType.	Call GetInformation () with unknown InformationType, the return status should be EFI_UNSUPPORTED.
5.5.11.1.4	0xab0d01e7, 0x8f70, 0x4a76,0x87, 0x7e,0xa7, 0x13,0xce, 0x00,0x1b, 0x72	EFI_ADAPTER_INFORMATION_PROTOCOL.GetInformation - GetInformation() returns EFI_INVALID_PARAMETERS with NULL InformationBlock.	Call GetInformation ()with NULL InformationBlock, the return status should be EFI_INVALID_PARAMETERS.
5.5.11.1.5	0x5a831392, 0x7ee7, 0x4f3e,0xbc, 0xd6,0x32, 0x6d,0x64, 0xf9,0xc2, 0x1c	EFI_ADAPTER_INFORMATION_PROTOCOL.GetInformation - GetInformation() returns EFI_INVALID_PARAMETERS with NULL InformationBlockSize.	Call GetInformation ()with NULL InformationBlockSize, the return status should be EFI_INVALID_PARAMETERS.

7.11.2. SetInformation()

Number	GUID	Assertion	Test Description
5.5.11.2.1	0xeed7dbd9, 0x834c, 0x4dbf,0xa1, 0x8d,0x39, 0x9f,0xdf, 0x19,0xd3, 0xf0	EFI_ADAPTER_INFORMATION_PROTOCOL.SetInformation - SetInformation() returns EFI_SUCCESS with valid information type.	Call GetSupportedTypes() to get the valid Information type. Call GetInformation () the return status should be EFI_SUCCESS and the InformationBlock != NULL. Call SetInformation()the return status should be EFI_SUCCESS or EFI_WRITE_PROTECTED.
5.5.11.2.2	0x2e1eae6b, 0x95f1, 0x4189,0xac, 0x02,0xc8, 0x50,0x41, 0x02,0x3c, 0xca	EFI_ADAPTER_INFORMATION_PROTOCOL.SetInformation - SetInformation() returns EFI_SUCCESS with valid information type.	Call GetSupportedTypes() to get the valid Information type. Call GetInformation () the return status should be EFI_SUCCESS and the InformationBlock != NULL. Call SetInformation()the return status should be EFI_SUCCESS or EFI_WRITE_PROTECTED. Call GetInformation ()and check the received information with the Information set by step3. They should be equal.
5.5.11.2.3	0xdb4d7a52, 0x608c, 0x46f7,0xaf, 0x23,0x0b, 0x10,0x1e, 0xc8,0xb8, 0xec	EFI_ADAPTER_INFORMATION_PROTOCOL.SetInformation - SetInformation() returns EFI_UNSUPPORTED with unknown InformationType.	Call SetInformation() with unknown InformationType, the return status should be EFI_UNSUPPORTED.
5.5.11.2.4	0xd15882e0, 0xcb55, 0x42f4,0xbb, 0x30,0xcb, 0xa0,0x50, 0x3a,0xad, 0xc9	EFI_ADAPTER_INFORMATION_PROTOCOL.SetInformation - SetInformation() returns EFI_INVALID_PARAMETER or EFI_WRITE_PROTECTED with NULL InformationBlock.	Call SetInformation()with NULL InformationBlock, the return status should be EFI_INVALID_PARAMETER or EFI_WRITE_PROTECTED.

7.11.3. GetSupportedTypes()

Number	GUID	Assertion	Test Description
5.5.11.3.1	0x59a9f08d, 0xad58, 0x49e0,0x92, 0x7f,0x9b, 0x46,0xbb, 0x62,0x3b, 0x41	EFI_ADAPTER_INFORMATION_PROTOCOL. GetSupportedTypes - GetSupportedTypes() returns EFI_SUCCESS.	Call GetSupportedTypes() , the return status should be EFI_SUCCESS.
5.5.11.3.2	0xac9f6a14, 0xff26, 0x43d1,0x8c, 0x47,0x61, 0x56,0x00, 0xc4,0x12, 0xf4	EFI_ADAPTER_INFORMATION_PROTOCOL. GetSupportedTypes - GetSupportedTypes() returns EFI_SUCCESS.	Call GetSupportedTypes() to get the valid Information type. The Information type received from step1 should be one of the probable types.
5.5.11.3.3	0xd55b2936, 0x5f3f, 0x40a8,0xb8, 0xa1,0x40, 0x9f,0x59, 0x50,0xda, 0x61	EFI_ADAPTER_INFORMATION_PROTOCOL. GetSupportedTypes - GetSupportedTypes()returns EFI_INVALID_PARAMETER with NULL InfoTypesBuffer.	Call GetSupportedTypes()with NULL InfoTypesBuffer, the return status should be EFI_INVALID_PARAMETER.
5.5.11.3.4	0x890c711f, 0xce91, 0x4426,0xa5, 0xfd,0x01, 0x0a,0x1c, 0xa5,0x33, 0x5b	EFI_ADAPTER_INFORMATION_PROTOCOL. GetSupportedTypes() - GetSupportedTypes()returns EFI_INVALID_PARAMETER with NULL InfoTypesBufferCount.	Call GetSupportedTypes()with NULL InfoTypesBufferCount, the return status should be EFI_INVALID_PARAMETER.