Introduction

1. Introduction#

1.1. Overview#

This document provides detailed information for each assertion in the UEFI SCT fundamental service and protocol tests. This document can be used as a reference on case assertion for UEFI SCT users.

Reference Documents

  • UEFI Specification – indicates current and past UEFI specifications, unless specific versions are noted

  • UEFI SCT Getting Started

  • UEFI SCT User Guide

5.26.2.7.71 0x732738e8, 0x1ff1, 0x4f3a, 0xa0,0xc8, 0x38,0x81,0x1d,0x15,0x92,0x83

EFI_MTFTP4_PROTOCOL.ReadFile()

- ReadFile() must return

EFI_PROTOCOL_UNREACHABLE when receive an ICMP protocol unreachable packet.

1. Call EFI_MTFTP4_SERVICE_BINDING_PROTOCOL.CreateChild() to create a new EFI_MTFTP4_PROTOCOL child handle.

2. Call EFI_MTFTP4_PROTOCOL.Configure() with all valid parameters.

3. Call EFI_MTFTP4_PROTOCOL.ReadFile() with all valid parameters. OS side should capture the packet sent from EUT side.

4. Configure Host side to send back an ICMP protocol unreachable packet and the return status should be EFI_PROTOCOL_UNREACHABLE.

5. Call EFI_MTFTP4_SERVICE_BINDING_PROTOCOL.DestroyChild() to destroy the newly created EFI_MTFTP4_PROTOCOL child handle and clean up the environment.
5.26.2.7.72 0xd1c4e1e8, 0x1099, 0x4646, 0xb7,0xc9, 0x64,0x7e, 0x65,0xc3, 0x82,0x30

EFI_MTFTP4_PROTOCOL.ReadFile()

- ReadFile() must return

EFI_PORT_UNREACHABLE when receive an ICMP port unreachable packet.

1. Call EFI_MTFTP4_SERVICE_BINDING_PROTOCOL.CreateChild() to create a new EFI_MTFTP4_PROTOCOL child handle.

2. Call EFI_MTFTP4_PROTOCOL.Configure() with all valid parameters.

3. Call EFI_MTFTP4_PROTOCOL.ReadFile() with all valid parameters. OS side should capture the packet sent from EUT side.

4. Configure Host side to send back an ICMP port unreachable packet and the return status should be EFI_PORT_UNREACHABLE.

5. Call EFI_MTFTP4_SERVICE_BINDING_PROTOCOL.DestroyChild() to destroy the newly created EFI_MTFTP4_PROTOCOL child handle and clean up the environment.

1.2. System Hang#

If the system hangs in any of tests, the UEFI SCT framework records a failure assertion in the test report and skips this test after a system restart.

Number

GUID

Assertion

Test Description

5.20.1.1.1

0xde687a18, 0x0bbd, 0x4396, 0x85, 0x09, 0x49, 0x8f, 0xf2, 0x32, 0x34, 0xf1

System hangs or stops..

The name of the test which causes the system hang can be found in the test report.
Contents